Home :: Aquarium Supplies :: Additives & Medications :: Seachem :: Seachem CupriSorb Copper Remover 250ml/8.5oz.

Seachem CupriSorb Copper Remover 250ml/8.5oz.

Seachem CupriSorb Copper Remover 250ml/8.5oz.
CupriSorb is a powerful adsorbent of copper and heavy metals. CupriSorb will remove copper more rapidly and efficiently than carbon and is thus ideal for emergency copper removal. It extracts all types of copper from water and, if in continuous use, from the gravel/substrate bed as well. CupriSorb will allow maintenance of invertebrates in copper-treated tanks by removing copper leaching from substrates. This product is sold by volume. Cited weight is minimal weight.

DIRECTIONS: Use 250 mL for every 600 L (150 gallons*) to remove up to 7,500 mg (12 ppm) of copper. For best results, CupriSorb should be placed so as to maximize the flow of water through it. To remove undetectable substrate leaching copper keep CupriSorb in use for at least 2 weeks after copper tests report no copper. Use in a canister filter, chemical filtration module, box filter, or any high flow area of a trickle filter. Exhaustion is indicated by a pronounced discoloration of the beads to a deep blue black color. Use MultiTest: Copper to monitor copper. When exhausted, CupriSorb may be discarded or regenerated. REGENERATION: Soak in a non-metal container with 2 cups of water and 1-2 cup of muriatic acid (available with pool supplies: PAY HEED TO WARNINGS on acid container!). This is best done outside and away from children. Soak for 1 hour, rinse well. Repeat as required to restore the original color. Rinse well, add sodium bicarbonate until foaming stops, and rinse again. CupriSorb is now ready for reuse. If original color cannot be restored after several acid washes, proceed with rinses and bicarbonate step, then regenerate as HyperSorb or Purigen.

250 mL / 8.5 fl. oz. Treats 600 L (160 US Gallons)
Our price: $21.99
  Add to wish list  Add to wish list